COUNT DOWN TIMER MODULE
Type:
SV40LED |
| |
 |
| |
CHARACTERISTIC:
- Led display panel timer
- 99min., 59 sec. programmable count down timer
- 30 sec. sound signal at the end of the count down
- Led light showing the relay status (on when contact closed)
- Snap-in fixing
- Big led display 33x14mm
- 3 setting buttons: "MIN", "SEC" and "START/STOP"
- Available colours: white, black and grey
|
| |
 |
| |
SPECIFICATIONS
- Rated voltage: 16A 240V 50/60Hz
- Hole dimensions: 58X44X44mm
- Display digit height mm 8
- Ambient temperature min 0°C to max 80°C
|
| |
OPERATING
- When turning ON, two acoustic "beeps" will be emitted
- Press button "MIN" and/or "SEC" once to advance min. or sec. by one.
- Press and hold button "MIN" or "SEC" to advance quickly.
- When any button is pusched a "beep" acoustic signal is emitted.
- Push the "START/STOP" button to start the count down process, during this operation:
- The timing will be updated on display every second
- The contact is closed and led ON
- When the counting is ended:
- The contact will open and the led will turn off
- The acoustic signal is activated
- push any button to stop the sound
- When counting is finished on display the last timing settled will appear
- To reset push button "MIN" and "SEC" as the same time
- While during the counting down it's possible to push the "START/STOP" button to stop the counting process (and in case push it again to re-start the counting).
|
| |
 |
