SINCHRONOUS Type: MI15 |
|
|
|
 |
|
TECHNICAL DATA
|
|
| Electrical features: | |
| • Switch conform to | EN 60730-1:2011 EN 60730 -2 -7:2010 |
| • Standard | KEMAENEC05 |
| • Rated voltage | 250VAC |
| • Intensity |
16 (4)Amps max |
| • Distance between contact | > or = 3mm |
| • Creepage distance (normal situation) | Mini 5 mm |
| • Proof tracking index | PTI 250V |
| • Switch for appliance class | I – II |
| • Dielectric strength | 3750 VAC |
| • Number of electrical operation | 10.000 cycles |
| • Tab terminals | 6.35x0.8mm |
| • Patterns nos | 1(NO) and 1(NC) |
| • Number of switches | 1 to 6 contacts |
| • Switch position at rest | NO-NC |
| • Configuration of switches possible | SPST DPST SPDT DPDT |
| • Minimum contact pressure | NO: 40g NC: 30g |
| • Degree of protection | IP00 |
| • Degree of pollution | 2 |
| • Category to heat and fire | 850°C |
| • Insulating material | tracking resistant (250V) |
| • Overvoltage category | II |
| • Temperature limit | T85°C |
| • Max T° of terminals | 150°C |
| Motor features: | |
| • Motor | type synchronous |
| • Rated voltage | 230 VAC +/- 10% |
| • Frequency | 50Hz (60 Hz) |
| • Absorbed power | 1.5W |
| • Rotation number | 600rpm (50 Hz) |
| • Insulate class | H |
| • Using temperature | -10°C to 85°C |
| • Marking | According with standard |
| Mechanical features: | |
| • Timing range | 15’ 30’ 45’ 60 ’90 ‘ 2h,3h,4h,6h,12h,14h, 16h,24h. |
| • Timing tolerance | +/- 3% |
| • Winding up direction | clockwise |
| • Minimum timing angle | 25° |
| • Maximum timing angle | 300° |
| • Manual position | 30° anti clockwise |
| • Angle accuracy of shat at rest | +/- 2° |
| • Maxi Number of automatic cycles | 10.000 |
| • Number of manual cycles (using clutch) | mini 2500 |
| • Wind up Torque after 10° | 10 to 20 N.cm |
| • Wind back torque | 5 to 20 N.cm |
| • Residual operating torque | 2 N.cm (depending on timing) |
| • Dimension of the main shaft diam x flat x length | 6x4.6 different length |
| • Maximum radial load on shaft | 15 N.cm |
| • Maximum thrust or traction on the shaft | 100 N |
| • Max thrust on terminal when connecting/disconnecting |
80 N |
| • Standard fixing with 2 screws at 28.6mm | DIN 7981 |
| • Maximum of penetration depth of mounting screws |
7.5mm |
| • Approximate weight | 85 gr. 112 gr. 138 gr. |
RoHS REACH |
|