LED oven lamp 77.110 for round cut-out
INNOVATIVE THERMAL MANAGEMENT FOR THE OVEN LAMP
The AIRPASS technology in our round oven lamps for existing standard cut-outs reduces the
effort involved for thermal management within the appliance. For this purpose, AIRPASS discs
are located on several levels between the LED light source and the reflector or the glass lens.
These enable air to circulate and protect the LEDs from the radiant heat from the oven cavity.
An additional cooling airflow in the upper part of the light fixture assists heat dissipation, so that no active cooling is required.

As AIRPASS technology makes low-cost installation possible in existing appliance series, these LEDs are suitable as entry-level solutions.
 |
ADDITIONAL FEATURES
- Standard Ø = 35.5 mm cut-out, simple upgrade optional
LEDs
- Variable LED parameters (colour temperature, CRI, power rating)
- Energy efficiency: Possibility to upgrade to a higher energy efficiency class
Installation
- Easy installation by means of clip-in fixing
Beam angle
- Symmetrica
Protection class
- Class III due to operation with SELVpower source
|
Steam-tight version available for multi-function appliances
LED door lamp 77.116 for professional cooking equipment
LINEAR LED DOOR LAMP
Professional cooking equipment is usually more complex than conventional household devices made for
private use. Equipped with steam generators, fan impellers, grease traps, temperature probes and shelf
supports, there is often little space left for lighting. We developed the 77.116 LED door installation
system to ensure that the cooking chamber can be uniformly illuminated despite this lack of space.
It is easy to assemble, easy to clean and the lighting technology can be adapted to individual requirements.
 |
ADDITIONAL FEATURES
LEDs
- Variable LED parameters (colour temperature, CRI, power rating)
- Energy efficiency: Possibility to upgrade to a higher energy efficiency class
Thermal management
- Thermally optimised components
- Spring clamps ensure even contact pressure between the LED board and the heat sink
- Aluminium heat sink
- Maximum ambient temperature of 100 °C
Installation
- Easy installation by means of clip-in fixing
- Minimal protrusion into the interior
- Easy to service
Design
- Variable length
- Satin glass cover
- Robust design
Beam angle
- Symmetrica
Protection class
- Class III due to operation with SELVpower source
|